Arturia MiniFuse 2 USB-C Audio Interface
- 24 Bit / 192 kHz
- +48 V phantom power switchable
- VU meter
Arturia MiniFuse 2 Review
In case you’re in search of a sensible and intuitive USB audio interface for proficient audio recording, look no further from Arturia’s MiniFuse 2 White.
Just like the smaller model – MiniFuse 1 Black – the main focus right here is on the small form factor and ease of use, and to function a mobile, high-quality interface. It would not matter whether or not you wish to record vocals or instruments, because due to the 2 combo jacks (XLR and 6.3mm jack) with 48V phantom power for condenser microphones, all mono and stereo signals could be recorded with excessive fidelity.
The 2 Hi-Z inputs are additionally perfect for high-impedance guitars, should you determine to make use of virtual amps in your software. Next to the MIDI in-/Output on the rear panel, there’s additionally a USB-A hub connector for connecting extra USB-enabled units.
Arturia MiniFuse 2 Key Features
Condensed in dimension and very lightweight for efficient transportation, the Arturia MiniFuse 2, seen right here within the trendy white finish, is an audio/MIDI interface that provides distinctive industry-grade sound from the first usage.
Consisting of a 2 in/2 out design, record and connect 2 instrument or microphone sources at the same time, one thing perfect for monitoring singer/songwriter sessions, podcasts, and way more. The unit has a bit-depth of 24 bit and a sample rate of 192 kHz, which is more than enough to fulfill probably the most discerning audio engineers. To make things better, the interface additionally has a dynamic range of 110 dB and an input noise of -129 dB.
The right choice for the musician and producer at all times on the move, this Arturia interface offers fast connectivity with its USB-C compatibility, so you possibly can at all times create wherever you go.
The MiniFuse 2 sounds fairly good, with good clear main outputs and loads of volume from the headphones. The instrument input sounds nice and it’s good to see two similar mic/line/instrument inputs at this value. However, it’s the general performance that wins through right here. With loads of backlit buttons and illuminated controls, you possibly can see what’s happening simply by glancing at the interface.
The hardware monitoring influences each headphone and main output, and by default inputs 1 and 2 are panned to opposite sides. Fortunately, there’s a devoted backlit button to mono the inputs, and the headphone and monitoring knobs even have built-in blue LEDs.
Distinctive in this price range, it has a real 5-pin MIDI input and output. Add a USB 2 HUB for connecting an accessory when all of your computer’s ports are full. It connects to the computer through a USB-C connector to offer a greater quality connection however is absolutely compatible with any USB 2 or 3 computer system.
Arturia MiniFuse 2 Software Bonuses
But that is not all! Arturia wants to present you with distinctive working expertise, so the MiniFuse 2 comes with a fairly unbelievable software program bundle. This downloads the Control Centre installer and likewise tunnels you thru to the software program bundles.
The software program contains the Intro model of Arturia’s wonderful Analog Lab, 4 Arturia effects (Rev Plate-140, Pre 1973 classic preamp, Delay Tape-201 echo, and Chorus Jun-6 analog chorus), Native Instruments Guitar Rig LE, and Ableton Live Lite. There are additionally two three-month trial subscriptions (Splice Creator Plan and Auto-Tuner Unlimited).
MiniFuse Control Centre is used for firmware upgrades and may also be used to modify instrument inputs and activate phantom power. Nonetheless, there are additionally devoted backlit front panel switches for these choices so this appears a little unnecessary.
Where it might really come in useful is it additionally has input meters, so though the entrance panel gain knobs have slightly intelligent built-in blue and red degree LEDs, you’ll get a greater thought of input ranges from the Control Centre panel.
- Monitor level control
- Headphone level control
- Switchable direct monitoring with mix control
- 2 Line outputs: 6.3 mm jack, balanced
- Stereo headphone output: 6.3 mm jack
- Integrated USB-A hub (USB-MIDI, max. 250 mA)
- MIDI in / out
- USB bus-powered
Why You Need the Arturia MiniFuse 2
Arturia has carried out the business once more with the MiniFuse interfaces. They’re affordably priced, sound nice for the cash, and hold things good and easy when it comes to options.
The MiniFuse 2 is our choice of the 2 launch products; when you can afford the little further its prices, the added versatility of twin inputs and MIDI connectivity makes it a greater possibility for the long run, permitting you to attach more devices as and when your production process develops and your studio setup evolves.
Conclusion
For the price range that these audio interfaces are in, you cannot expect to have the best and the ultimate audio tool, but if you are a beginner and you are on a budget, this is the interface that you need to start your journey. Not that there are not any other choices to reach out for, but in this price range, all interfaces offer similar features – and Arturia is in the race as well!
In case you are having any questions in regards to this unit that we shared here, please let us know in the comment section below or reach out to Arturias‘ customer care page!
